Windows Setup 4-35

4.Confirm that the hard disk to be converted is the hard disk where the system is installed and click [Convert].

If the selected hard disk contains a system partition, you will have to restart the computer to complete the upgrade of the hard disk. The message also states that file systems on any of the hard disks to be upgraded will be forcedly dismounted. This means if any file systems are in use at the time of upgrade, they will be dismounted, so that the upgrade can continue.

5.After the system has restarted, display [Disk Management] again and set the hard disks for creating mirror volume.

IMPORTANT:

When the hard disk status is “Not Initialized”, right-click that hard disk and initialize it.

If “Foreign” is displayed, perform “Convert to Basic Disk” and then perform “Convert to Dynamic Disk…”.

Hard disks to be mirrored must be inserted to the corresponding slots. For details, see the diagram below:

 

Slot1

Slot2

Slot3

 

 

 

 

 

 

 

Group1

Group2

Corresponding slots for mirroring process