5-10Procedures after Completion of Installation
Uninstall

The configuration of NEC ESMPRO Agent and BMC and the uninstallation of BMC FW Update Service are described below.

Uninstallation of NEC ESMPRO Agent

The procedure of uninstalling NEC ESMPRO Agent is described below.

IMPORTANT: Uninstallation of NEC ESMPRO Agent

Start the uninstallation of NEC ESMPRO Agent after the system is started completely.

If NEC ESMPRO Agent is uninstalled just after the system startup, the setup program may freeze displaying the [Service Being Deleted…] dialog box. Shutdown the system by using "Task Manager" or other operation. Then uninstall NEC ESMPRO Agent after the system is started completely.

With use of NEC EXPRESSBUILDER:

1.Make the main menu of the NEC ESMPRO setup appear by referring to the section "Install" in this document.

2.Click [NEC ESMPRO Agent].

The [Welcome to Setup of NEC ESMPRO Agent] dialog box appears.

3.Click the [Next] button.

Message "NEC ESMPRO Agent is already installed" appears.

4.Select [Delete] and then click the [Next] button.

Now NEC ESMPRO Agent is uninstalled.

Without use of NEC EXPRESSBUILDER:

1.Start [Add/Remove Programs] on [Control Panel].

2.Select [NEC ESMPRO Agent] and click [Add/Remove]. Now NEC ESMPRO Agent is uninstalled.