Error! Style not defined. 4-51

8.Change the value set for [Initial Size] in the [Paging file size for selected drive] box to the [Recommended] value or more, and then click [Set].

IMPORTANT:

Be sure to create the file in the size more than [Recommended] value in the OS partition. If a value smaller than the [Recommended] value is set for [Initial Size] of the paging file, accurate debug information (memory dump) may not be collected. For the [Recommended] value, see "Size of the Partition to be Created" (page 4-5). To be prepared for failure, it is recommended to press the dump button to see if the memory dump can be collected in normally beforehand.

If the memory has been expanded re-set the paging file according to the memory size.

9.Click [OK].

A message is displayed asking you to restart the system depending on the changed settings. Restart the system according to the messages.