6-10Troubleshooting

<For on-board >

-Status emb-82559 10/100 Enet Adapter

-Status emb-82544GC Copper Gigabit Adapter

<For option board >

-Status AA-U51500 10/100 Enet Adapter (100BASE-TX)

-Status AA-U57000 Fiber Gigabit Adapter (1000 BASE-SX)

-NEC 8490 XT Copper Gigabit Adapter (1000 BASE-T)

You will then see the dialog box on the right of this paragraph. This is because one of two teamed adapters constituting dual configuration is removed.

Click [Yes], to remove the adapter from Team.

Remove the other adapter in the same way. <For on-board >

-Status emb-82559 10/100 Enet Adapter

-Status emb-82544GC Copper Gigabit Adapter

<For option board >

-Status AA-U51500 10/100 Enet Adapter (100BASE-TX)

-Status AA-U57000 Fiber Gigabit Adapter (1000 BASE-SX)

-NEC 8490 XT Copper Gigabit Adapter (1000 BASE-T)

4)Right click [Team #1:Adaptive Fault Tolerance Mode] and select [Remove].