Troubleshooting 6-5

<When starting Recovery Console from Windows Server 2003 CD-ROM>

(a)Insert the Windows Server 2003 CD-ROM into the drive.

(b)When the CD is set, reset the system (press Ctrl + Alt + Delete) or press the power switch to power off and on to reboot the NEC Express5800/ft series.

(c)When the following message appears, press any key to start up from the CD-ROM.

IMPORTANT: Press any key while the message is displayed.

Otherwise the system will be started up from a hard disk and Recovery

Console will not be started.

(d) When the following message appears on the screen, press F5 + F6 quickly.

IMPORTANT: Unless F5 + F6 keys are pressed, Recovery Console does not start up. If the screen for selecting HAL as described in 3 does not appear, reboot the system and start again from activation of Windows Server 2003 CD-ROM.

3.When you see the screen for selecting HAL, follow the steps below.

(a)Select “Other” (default) and press Enter.