6-16Troubleshooting
9.Start Device Manager, choose [View] then [Device by connection] and do the following:
a)Delete the red-circled device entries in the following figure.
IMPORTANT: Do not uninstall entries for “Stratus Fault Tolerant 69000 Video” which appears as child entries of “ACPI Multiprocessor ftServer”.
Delete the following device entries:
-StratusDual Initiated Disk Device
-StratusDual Initiated Disk Device
-Stratus Fault Tolerant 69000 Video
-! Unknown Device
a-1. Select the device and right-click. Choose [Uninstall].
a-2. After the [Confirm Device Removal] dialog box displayed, confirm the device name and then click [OK].
10.When the option board is connected, perform the following operations for each option.
Use the CD-ROM you used in step 5 and perform these operations:
a)When N8804-001P1 (100BASE-TX Adapter) is connected a-1. Execute [Command Prompt].
a-2. Run the following command from Command Prompt and move to CD-ROM drive.
C:\> CD-ROM drive:
a-3. Run the following command from Command Prompt and move to the folder with the batch file.
CD-ROM drive:\> cd \WINNT\DOTNET\EN
a-4. Run the following command from Command Prompt for updating the driver. CD-ROM drive:\WINNT\DOTNET\EN> N8804001.BAT
