Egress: | Type the port effective egress rate. The valid range is |
| 0~1000. The unit is 100K. |
| 0: disable rate control. |
| 1 ~ 1000: valid rate value. |
Priority: | Enable or disable the port priority function. There |
| are two priorities (high or low) provided if port |
| priority is enabled. |
Security: | A port in security mode will be “locked” without |
| permission of address learning. Only the incoming |
| packets with SMAC already existing in the address |
| table can be forwarded normally. Users can disable |
| the port from learning any new MAC addresses, then |
| use the static MAC addresses screen to define a list |
| of MAC addresses that can use the secure port. |
Enter the settings, then click Apply button to change on this page.
22 | NP2624M User Guide |
| YML827 Rev1 |
