NetComm NP2624M manual Quiet Period, Tx Period, Supplicant Timeout, Server Timeout, Max requests

Fu:	Force the specific port to be unauthorised.
Fa:	Force the specific port to be authorised.
Au:	The state of the specific port was determined by the
	outcome of the authentication.
No:	The specific port didn’t support 802.1x function.

Miscellaneous Configuration

In this page, users can change the default configuration for the 802.1x standard:

Quiet Period:	Used to define periods of time during which it will
	not attempt to acquire a supplicant (Default time is
	60 seconds).
Tx Period:	Used to determine when an EAPOL PDU is to be
	transmitted (Default value is 30 seconds).
Supplicant Timeout:	Used to determine timeout conditions in the
	exchanges between the supplicant and authentication
	server (Default value is 30 seconds).
Server Timeout:	Used to determine timeout conditions in the
	exchanges between the authenticator and
	authentication server (Default value is 30 seconds).
Max requests:	Used to determine the number of re-authentication
	attempts that are permitted before the specific port
	becomes unauthorized (Default value is 2 times).
Reauth Period:	Used to determine a nonzero number of seconds
	between periodic re-authentication off the
	supplications (Default value is 3600 seconds).

42	NP2624M User Guide
	YML827 Rev1