
4.2.1. Port Configuration
This page allows you to change the status of every port.
Press the Space key to change the configuration of each item.
InRate (100K/unit): | User can set input rate control, which is 100K per |
| unit. The valid range is 0~1000. |
| 0: disable rate control. |
| 1~1000: valid rate value. |
OutRate (100K/unit): | User can set output rate control, which is 100K per |
| unit. The valid range is 0~1000. |
| 0: disable rate control. |
| 1~1000: valid rate value. |
Enabled: | User can disable or enable this port control. |
| “Yes” that mean the port is enabled. |
| “No” that mean the port is disabled. |
Auto: | User can set auto negotiation mode to “Auto”, |
| “Nway_Force”, or “Force” per port. |
Spd/Dpx: | User can set “100Mbps” or “10Mbps” speed on port |
| 1~port 24. |
| Set “1000Mbps”, “100Mbps” or “10Mbps” speed |
| on port25~port26 (dependant on optional Gigabit |
| module card), and set |
| mode. |
Flow Control: | Full: User can enable or disable full flow control |
| function (pause). |
| Half: User can enable or disable half flow control |
| function (backpressure). |
64 | NP2624M User Guide |
| YML827 Rev1 |