Windows SMB Printing

This method requires no additional software to be installed, but the NetBEUI or TCP/IP protocol must be installed on your computer. Use the following procedure to install the Print Server's printer as a Windows SMB network printer:

1.Double-click the Network Neighborhood icon on the desktop.

2.On the View menu, select Details.

3.Locate the desired Print Server , as shown below:

■If it is the same Workgroup as your computer, it will be listed on screen.

■If it is in a different workgroup, double-click Entire Network, then double-click the appropriate Workgroup to open it.

4.Double-click the Print Server icon to view a Printer icon for each printer port. The "Comment" field may indicate what type of printer is connected to the port.

5.To install a printer, right-click the desired printer icon, and choose "Install", as shown below. This will start the Add Printer wizard.

6.Follow the prompts to complete the installation.

■For information about the question "Do you print from MS-DOS programs?", see Printing from MS-DOS Programs below.

■Select the Printer Manufacturer and Model to match the printer connected to this port on the Print Server , and complete the Wizard.

www.netcomm.com.au

Rev. 1 - YML657

Page 18

NP3640 Fast Ethernet Mini Print Server User Guide

Page 18
Image 18
NetComm NP3640 manual Windows SMB Printing