If the desired Print Server is not listed:
■Check all cables to the Print Server .
■Check the Print Server's LEDs:
■The Red LED should be OFF and the Green LED should be ON or flashing.
■Check the 10/100BaseT link LED next to the LAN connection. If the auto negotiation fails, the 10/100BaseT Link LED will not light when the device is powered up.
■Check that your computer and the Print Server are on the same LAN segment. (If you don't have a Router or Gateway on your LAN, you only have 1 segment.)
■Check that your computer has either the TCP/IP or NetBEUI network protocols installed. See Checking your Network Protocols on page 11 for details.
Rev. 1 - YML657 | www.netcomm.com.au |
NP3640 Fast Ethernet Mini Print Server User Guide | Page 9 |
