NetComm NP3640 AppleTalk Macintosh, supported by the printer. Try selecting LaserWriter 7 instead

AppleTalk (Macintosh)

Problem No. 1	Why do I get an incorrect printout?
Solution No. 1	Some possible reasons are:
	■ You may have chosen Binary encoding to print the file. Try
	to use ASCII encoding.
	■ Some of the fonts, which are in your print file may not be
	supported by the printer. Try selecting LaserWriter 7 instead
	of LaserWriter 8.
Problem No. 2	Can't find the Print Server's name in the Chooser.
Solution No. 2	Try the following:
	1. Make sure that AppleTalk is on (the button next to Active is
	highlighted in the Chooser).
	2. Make sure the printer has been on and in the READY state
	for a few minutes.
	3. Make sure the printer has not been renamed since its last
	appearance in the Chooser.
	4. If the printer resides on a network with multiple zones, make
	sure the correct zone is selected from the AppleTalk Zones
	box in the Chooser.
Problem No. 3	My document didn't print to the right printer.
Solution No. 3	Check the following:
	■ Another Print Server with the same name may have received
	your print job. Use the PSTOOL to reconfigure your Print
	Server name and ensure all Print Server s have unique names.
	■ Make sure your application output encode is set to ASCII.
	If not, change it to ASCII.
Problem No. 4	My file doesn't print with the correct fonts.
Solution No. 4	Try changing your printer driver to LaserWriter 7.
Problem No. 5	My EPS file doesn't print with the correct fonts.
Solution No. 5	This is a problem that occurs in some application programs. Try
	downloading the fonts contained in the EPS file before printing
	the saved EPS file.
Problem No. 6	I can't select the "Remaining from:" item in the print dialog box.
Solution No. 6	If you have selected the Layout value, "2 Up", or "4 Up", you
	cannot access the Remaining from item. Choose other selections.

www.netcomm.com.au	Rev. 1 - YML657
Page 60	NP3640 Fast Ethernet Mini Print Server User Guide