Refresh
Menu Equivalent: Main - Refresh
Select this icon to update the Print Server device listing after changing the name or IP Address.
Exit
Menu Equivalent: Main - Exit
Exit the BiAdmin program. This does not save any changes you have made; you must Save to Device on each screen.
Menus
Main Menu
Device Status | Same as Device Icon. |
Printer Status | Same as Printer Status Icon. |
Configure | Same as Configure Icon. |
Upgrade | Same as Upgrade Icon. |
Refresh | Same as Refresh Icon. |
Exit | Same as Exit Icon. |
InitDevice Menu |
|
Reset Device | This will cause the device to reboot. This should be done after |
| making any configuration changes, or if the device stops |
| responding after some problems. |
Restore to Factory Default | This will restore ALL device values to their factory defaults. To |
| restore only the current screen, use the Set to Default button on |
| the screen. |
Attached Remote | This is used to connect to a Print Server device on another LAN |
| segment. You need to know the IP address of the remote Print |
| Server .If your LAN does not have a Router, you can ignore this |
| option. |
Connected Protocol | This option allows you to designate which LAN protocol will be |
| used for communication between the selected device and this |
| application. You should select ONE protocol only. |
Diagnostics menu |
|
Print Test Page | Use this option to print a test sheet from the selected Print |
| Server port. The test print out will include status information. |
|
|
www.netcomm.com.au | Rev. 1 - YML657 |
Page 28 | NP3640 Fast Ethernet Mini Print Server User Guide |
