NetComm NP3640 manual Novell NetWare

Novell NetWare

Problem No. 1	My Print Server cannot print the jobs sent to the print queue.
Solution No. 1	Try the following:
	1.	Check if the printer attached to the Print Server is on-line.
	2.	Check if your Print Server is logged into the file server (See
		Problem 2 below.).
	3.	Check the current status of the queues used by the Print
		Server, and ensure the queues are active.
	4.	Check if the NetWare printer number is correct.0 = parallel
		port 1 of the Print Server.1 = parallel port 2 of the Print
		Server.2 = parallel port 3.
	5.	Check to see if the Print Server is a static queue server to the
		queue.Locate the Print Server Object, and check the Queues
		Serviced by Printer. Ensure that the correct queues are on the
		list.
	6.	The total number of queues to be serviced may be over the
		limit of 56. If so, reduce the number of queues.
Problem No. 2	My Print Server is configured as a Novell Print Server, and
	cannot log in to a File Server.
Solution No. 2	The following steps may solve this problem:
	1.	Check the Novell file server's name. If it is over 20 characters
		long, rename it using no more than 20 characters.
	2.	Check that the Print Server's configuration data, especially
		the password, is correct.
	3.	Check the NetWare server. If using Bindery mode, check the
		master file server to see if the login status of the Print Server
		is Ready. If it is not, check the error message and perform the
		required corrective action.
	4.	If the Print Server is servicing more than one file server,
		check to see that all required file servers are in the list of
		"File Servers To Be Serviced". If not, insert the required file
		server name to the list.

www.netcomm.com.au	Rev. 1 - YML657
Page 62	NP3640 Fast Ethernet Mini Print Server User Guide