NetComm NP3640 manual Printer Status, Configure Server

Printer Status

This screen displays the current status of each port. For each port, the following data is listed:

Connected Printer	The model name of the printer connected to the port, if the
	printer name is known. (If the printer is not bi-directional, this
	information is unavailable.)
Status	The current status of the printer (On-line, Off-line, Out of
	paper)
Printing Information	This will show either Idle or Printing.

Configure Server

Print Server Name	Change the default name if you wish. The new name must not
	contain any spaces or blanks.
Password	Enter the device password, and again in the Verify field. Once a
	password is entered, it is required in order to gain access and
	change the configuration.
Enable Protocols	Non-TCP/IP may be disabled if they are not required on your
	LAN. The available protocols depend on the Print Server model.

Rev. 1 - YML657	www.netcomm.com.au
NP3640 Fast Ethernet Mini Print Server User Guide	Page 39