Installation - User Software

1.Run the InterNet Printing Port (IPP) installation program SETUP.EXE

2.Default values for the installation are:

Directory - C:\Program Files\Internet_Printer

Start Menu folder - InterNet Printing Port Driver

3.You will then see the Configure Port screen, as shown in the following screenshot.

4. The following data must be provided.

Port Name

Enter a descriptive name (e.g. "WAN") for the new

 

printer port.

Remote Printer E-mail Address

The E-Mail address for the Internet printer. Your print

 

jobs will be sent to this E-Mail address.

Mail Server Nameor IP Address

This is the name or IP Address of your Mail Server. If

 

you are on a LAN, ask the LAN Administrator. If using a

 

dial-up connection, use the data provided by your ISP.

Your Internet E-mail Address

The normal address that people use to send you E-mail.

Retry Interval (Seconds)

If unable to connect to the E-Mail server, retry after this

 

time period (1 to 255 seconds, 30 is usually OK).

Reply Notification Mail

Check to receive an E-Mail when your print job has been

 

processed.

5. On completion, a new printer port will have been created.

Rev. 1 - YML657

www.netcomm.com.au

NP3640 Fast Ethernet Mini Print Server User Guide

Page 55

Page 55
Image 55
NetComm NP3640 manual Installation User Software