Port Tab, Physical Port, Logical Port | NetComm NP3640 guide

Port Tab

This screen has 2 panels - Physical Port and Logical Port.

Physical Port

The following settings are available:

■Selected Physical Port - Select the Physical Printer Port you wish to configure.

■Handshake Signal - Select Busy Only or Busy & Ack for the Physical Port.

■Printer Type - Select High Speed or Low Speed for the Printer Type.

Logical Port

Logical Ports (printers) can be used in the Unix environment. The following settings are available:

■Selected Logical Port - Select the Logical Printer Port you wish to configure. (The number of Logical Port depends on the number of physical port the device has. The Maximum available number is 8)

■Map to Physical Port - Select the physical Printer Port which the Logical printer will use.

■Convert LF to LF+CR - If checked, LF (line feed) characters are changed to CR+LF (carriage return + line feed).

■Prefix of Job - The printer control string (in hex) to be sent to the printer before each print job. This string cannot exceed 15 characters.

■Suffix of Job - The printer control string (in hex) to be sent to the printer after each print job. This string cannot exceed 15 characters.

The Get Defaults button will reset all settings to their factory-default values.

www.netcomm.com.au	Rev. 1 - YML657
Page 34	NP3640 Fast Ethernet Mini Print Server User Guide

Image 34

NetComm NP3640 manual Port Tab, Physical Port, Logical Port

Contents

Page Contents Introduction Connecting your Mini Print Server Green LED Red LED Description Diagnostic Push ButtonLED Indicators Yellow LED Orange LED Description Advanced Configuration and Management Configuring your Mini Print ServerConfiguration Methods Web Based Configuration and Management Using the Windows Wizard Procedure Rev YML657 Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Printing Methods Configuring your ComputersWhich printing method should I use? Checking your Network Protocols Windows Windows 2000/XP Setup Windows Peer-to-peer Printing Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Windows 9x/ME Setup Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Management Advanced Port Options Windows SMB Printing Capture Settings Printing from MS-DOS Programs Windows with Server-based Print Queues Windows LPR Printing Choose Standard TCP/IP Port, then click New Port Macintosh AppleTalk AppleTalk SetupAdvanced Setup and Management Printing LPR printing Setup Macintosh OS Installation BiAdmin Management UtilityRequirements Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Device Status IconsPrinter Status Upgrade ConfigurationWizard Menus Configuration System Tab TCP/IP Tab AppleTalk Tab NetBEUI Tab Internet Printing Tab Physical Port Port TabLogical Port NetWare Snmp Tab Web-Based Management Preparation Configuration Screens Connecting to the Print ServerServer Status Configure Server AppleTalk NetBEUI TCP/IP Connection Print Server Mode Remote Printer ModeGeneral Rev YML657 Management Stations Snmp Simple Network Management ProtocolTrap Receivers Logical Printers Internet Printing IPP Server Configuration Special FeaturesInternet Printing Protocol IPP Installing from the CD-ROM IPP Client Setup Windows 95/98/Me/NT 4.0/XPIPP Client Configuration Windows 95/98/ME/2000/XP/NT Installing using IPPCLIENT.EXE Changing the IPP Port Settings IPP Client Setup Windows 2000/XP Using IPP Printers Mail Server Internet Mail PrintingSystem Requirements Internet Print Server Internet Mail Printing Configuration User Software Installation User Software Checking the Printer Driver Using the new PortPrinting through the Internet Management Station Settings Configuring the Print Server for SnmpSnmp Settings Trap Receiving Station Settings Troubleshooting Fax Hardware & LAN Problems AppleTalk Macintosh Problem, perform the following steps Novell NetWare Windows Printing Problems Click OK to see the Print Port Configuration screen, as Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Preparing for TCP/IP Printing Network Server ConfigurationWindows NT Server Adding a TCP/IP Remote Printer Enter the appropriate logical printer number. e.g. L1 Novell NetWare Configuration Methods Bindery or NDSSetup Wizard Windows 2000 Server Other Method BiAdminConfiguration Data General Overview Setup for Ndps NetWareCreating an Ndps Manager Object Creating an Ndps Printer Agent Load Ndpsm Registering your NetComm Product Trademarks and NoticesUnix Systems Warranty Registration Form Page Product Warranty Limitations of Warranty