NetComm NP3640 manual Snmp, Configuring the Print Server for SNMP, SNMP Settings

SNMP

The Print Server supports SNMP (Simple Network Management Protocol). This allows network supervisors to monitor and control the Print Server using network management platforms such as HP OpenView, IBM SystemView, etc.

The appropriate MIB file must be imported into your SNMP management program using the Import-Compile command. Check your management program for details on this procedure. The MIB files are provided in the Mib folder on the CD-ROM, as follows:

Mib1p.mib	Single port models.
Mib2p.mib	Models with 2 ports

Configuring the Print Server for SNMP

Before using a SNMP Management station to manage the Print Server , the following settings should be assigned to it, in addition to the IP Address, Gateway Address, and Subnet Mask.

SNMP Settings

SysContact	Text Field - Name of the contact person.
SysLocation	Text Field - Location of the contact person.
Management Station IP Address(s)	Up to 4 Management Stations can be entered.
Trap Receiving IP Address(s)	Up to 4 Trap Receiving Stations can be entered.

Management Station Settings

For each Management Station, the following fields are available:

Access Permission	Options are:Read OnlyRead/WriteNot Accessible
Community String	Leaving this blank will disable management by this station.

Trap Receiving Station Settings

For each Trap Receiving Station, the following fields are available:

Community String	Leaving this blank will disable management by this station.
Trap Enable	Use this option to Enable/Disable Trap Receiving by this
	station.
Trap Severity	In this version, all traps are level 1.

Rev. 1 - YML657	www.netcomm.com.au
NP3640 Fast Ethernet Mini Print Server User Guide	Page 57