Section 3 - Configuring your Mini Print Server

This section provides an overview of the configuration process for Windows operating systems.

Overview

The Print Server is designed to support many different platforms, and the configuration required would depend upon the environment in which it is installed.

The Print Server usually requires configuration, but if there's a DHCP server on your network, then the device is just plug-and-play. A Windows-based setup Wizard is provided on the CD-ROM to simplify this task. This configuration is not required if you are using a Macintosh computer.

Computers wishing to use the printer attached to the Print Server always require configuration. See Section 4- Configuring your Computer for details.

If you wish to use a queue-based printing system using Windows NT Server/Windows 2000/ Windows XP, the Network Server must be configured as detailed in Appendix B - Network Server Configuration. However, it is not necessary to use a Network Server-based queue; client computers can print directly to the Print Server using the Peer-to-peer Printing installed by the User setup option on the CD-ROM.

Configuration Methods

The following methods are available to perform the required Print Server configuration:

Windows-based Wizard.

BiAdmin management utility program.

Web-based setup.

Advanced Configuration and Management

The BiAdmin management utility is provided for advanced configuration and management. This program is installed by default when the Administrator install option is chosen. See Section 5 for details on using BiAdmin.

Web Based Configuration and Management

The Mini Print Server can be accessed directly through a web browser for advanced configuration and management. See Section 6 for details on using Web Based Configuration.

www.netcomm.com.au

Rev. 1 - YML657

Page 6

NP3640 Fast Ethernet Mini Print Server User Guide

Page 6
Image 6
NetComm NP3640 Configuring your Mini Print Server, Overview, Configuration Methods, Advanced Configuration and Management