TCP/IP
IP Address | IP Address assigned to this device. If using dynamic IP |
| Addresses (DHCP, BOOTP, rarp), this should be left at 0.0.0.0. |
Subnet Mask | (Network Mask) If the Router (Gateway) Address is 0.0.0.0, |
| the Subnet Mask should also be left at 0.0.0.0. If you have a |
| router, enter the Subnet mask for the segment to which the Print |
| Server is attached. |
Gateway Address | If your network segment has a router or gateways, enter its IP |
| Address here. Otherwise, leave the address as 0.0.0.0. |
Connection
Delay before reconnection attempts
Sets how long the Print Server should wait before retrying a TCP/IP connection which is lost. Allowable values are from 0 to 255 seconds, with 2 as the default.
Number of reconnection attempts
Sets how many attempts at reconnection will be made. After that, the TCP/IP session will be terminated.Allowable values are from 0 to 255, with 254 as the default.
www.netcomm.com.au | Rev. 1 - YML657 |
Page 42 | NP3640 Fast Ethernet Mini Print Server User Guide |
