FVS338 ProSafe VPN Firewall 50 Reference Manual
Virtual Private Networking 5-15
v1.0, September 2006
To configure the VPN Client:
1. Right-click on the VPN client icon in your Windows toolbar and select the Security Policy
Editor. The Security Policy Editor screen will display.
2. In the upper left of the Policy Editor window, click the New Document icon to open a New
Connection.
3. Give the New Connection a name, such as to_FVS (shown in Figure 5-9).
4. In the Remote Party Identity section, from the ID Type pull-down menu, select IP Subnet.
5. Enter the LAN IP Subnet Address and Subnet Mask of the FVS338 LAN.
6. Check Connect using radio box and select Connect using Secure Gateway Tunnel from the
pull-down menu.
7. From the ID Type pull-down menu, select Domain Name and Gateway IP Address.
3. For the Domain Name, enter fvs_local.com and enter the WAN IP Address of the
FVS338.
Figure 5-8