FVS338 ProSafe VPN Firewall 50 Reference Manual
2-10 Connecting the FVS338 to the Internet
v1.0, September 2006
To manually configure your WAN1 ISP settings:
1. Does your Internet connection require a login? If you need to enter login information every
time you connect to the Internet through your ISP, select Yes. Otherwise, select No.
2. What type of IPS connection do you use? If your connection is PPPoE, PPTP or BigPond
Cable, then you must login. Check the Yes radio box. The text box fields that require data
entry will be highlighted, based on the connection that you selected. If your ISP has not
assigned any login information, then choose the No radio box and skip this section. For
example:
•Austria (PPTP): If your ISP is Austria Telecom or any other ISP that uses PP TP fo r login,
select this. Then, fill in the following highlighted fields:
–Account Name (also known as Host Name or System Name): Enter the valid account
name for the PPTP connection (usually your email “ID” assigned by your ISP). Some
ISPs require entering your full email address here.
Figure 2-7