9.If Edge Device was enabled, select the Authentication Type from the pull down menu which will be used to verify account information: User Database, RADIUS-CHAP or RADIUS-PAP. Users must be added thorough the User Database screen (see “User Database Configuration” on page 5-22or “RADIUS Client Configuration” on page 5-23).
Note: If RADIUS-PAP is selected, the router will first check the User Database to see if the user credentials are available. If the user account is not present, the router will then connect to the RADIUS server.
10.Click Apply. The new policy will appear in the IKE Policies Table (a sample policy is shown below)
Figure 5-20
Virtual Private Networking | 5-29 |
v1.0, September 2006
