FVS338 ProSafe VPN Firewall 50 Reference Manual
If required, you can also enter the address of another NTP server in the Server 2 Name/IP Address field. If you select this option and leave either the Server 1 or Server 2 fields empty, they will be set to the Default Netgear NTP servers.
5.Click Apply to save your settings or click Cancel to revert to your previous settings.
Figure
Monitoring the Router
You can be alerted to important events such as WAN port rollover, WAN traffic limits reached, and login failures and attacks. You can also view status information about the firewall, WAN ports, LAN ports, and VPN tunnels.
Enabling the Traffic Meter
To monitor traffic limits on each of the WAN ports, select Administration from the main menu and Traffic Meter from the submenu. The Broadband Traffic Meter screen will display. (The Broadband and Dialup ports are programmed separately.) A WAN port shuts down once its traffic limit is reached if the Block all traffic feature is enabled.
The Traffic Meter screen also provides the following information:
•Internet Traffic Statistics – Displays statistics on Internet Traffic via the WAN port. If you have not enabled the Traffic Meter, these statistics are not available.
Router and Network Management |
