| FVS338 ProSafe VPN Firewall 50 Reference Manual |
|
|
Item | Description |
System Name | This is the Account Name that you entered in the Basic Settings page. |
Firmware Version | This is the current software the router is using. This will change if you upgrade your |
| router. |
LAN Port | Displays the current settings for MAC address, IP address, DHCP role and IP Subnet |
| Mask that you set in the LAN IP Setup page. DHCP can be either Server or None. |
Broadband | Indicates whether the WAN Mode is Single or Rollover, and whether the WAN State is |
Configuration | UP or DOWN. If the WAN State is up, it also displays |
| • NAT: Enabled or Disabled. |
| • Connection Type: DHCP enabled or disabled. |
| • Connection State: Connected or Disconnected |
| • WAN IP Address |
| • Subnet Mask |
| • Gateway Address |
| • Primary and Secondary DNS Server Addresses |
| • MAC Address. |
Dialup Configuration | Displays the same details as for WAN1 Configuration. |
Note: The Router Status screen displays current settings and statistics for your router. As this information is
Monitoring WAN Ports Status
You can monitor the status of both of the WAN connections, the Dynamic DNS Server connections, and the DHCP Server connections. Select Network Configuration from the main menu and WAN Settings from the submenu. The Broadband ISP Settings screen will display. Click the Broadband Status link to obtain status on the Broadband port. Select the Dialup ISP Settings tab and click the Dialup Status link to obtain status on the Dialup port.
Router and Network Management |
