REASSEMBLY PROCEDURE | 1. B·tube |
|
|
9)Stick prism @ to righteye sleeve ~ using No. 200 l. Apply this adhesive in a ring ali around the top edge of @. and inserting @ into @, rotate it several times.
10)Attach <1Q§) to prism base @with washer ~ and screws @ x2 transitorily. Thereafter, screw in cover ring@ into c:I:QP. (After posicional adjustment, stick it with
No. 350)
11) Attach lefteye sleeve @ to prism base CIQD with washer @ and screws @x 2 transitorily. Thereafter, screw in <@ into @. (After adjustment, stick it with No. 350)
12) Stick plates c@x2 to light |
| |
Attaching | ||
incidence and exit surfaces of | ||
| part |
~, @ with adhesive No. 2002. Apply the adhesive
in a ring anta the attachlng
surfaces of the stop plates.
After about 30 minutes, attach
them to the prisms. Apply
Coincide
the edges.
black paint to the groove andFig. 19 attaching parts as shown in Fig. 19.
13)Stick light stop plate@ onto the light incidence surface of prism @ in the sarne way as mentioned in 12)ª·.
14)Attach prisms @ to
e@ and fix them with |
|
|
|
|
|
|
|
plastic screw @ transitorily. |
|
|
|
|
|
|
|
| - |
| " |
| |||
(After positional adjustmen t, |
| - - | |||||
| |||||||
stick them using No. 2001.) |
|
|
|
|
|
| '\~' j |
|
|
|
|
|
|
| |
(Fig. 20) | |||||||
|
|
|
|
|
|
|
|
Fig. 20
- 26-
