Nortel Networks 4060 manual Charge the batteries, Charging guidelines, How to charge the batteries

Set up the DECT Handset 4060

Charge the batteries

CAUTION

The batteries can become hot during the first charge cycle. If the fully-charged batteries are removed from the handset and inserted again, they can become overcharged when the handset is placed in the charger.

Charging guidelines

•Charge the battery for at least six to seven hours before using the handset for the first time.

•Charge the handset on a regular basis.

•Do not leave the handset connected to the charger longer than one month without using.

How to charge the batteries

1.Plug the charger into an electrical outlet.

2.Place the handset in the charger. The handset display shows Charging.

Charging and operating times

•Batteries require 6 to 7 hours to fully charge.

•When a fully-charged handset is switched off, it discharges in approximately one week.

•When batteries are fully charged, the handset has approximately 20 hours of talk time and between 200 and 300 hours of standby time.

The handset display screen shows the batteries’ charge status. See Figure 2 for battery charge statuses.

13