|
|
|
| Safety precautions 27 |
|
|
|
|
|
|
|
|
|
|
| Check | Accessory |
| Use to |
|
|
|
|
|
|
|
|
|
|
|
| 6 nuts |
| Connect all leads |
|
|
|
|
|
|
| 6 lock washers |
| Connect all leads |
|
|
|
|
|
|
| 2 washers |
| Connect the ground |
|
|
|
| stud |
|
|
|
|
|
Safety precautions
This section describes the safety precautions which are vital for handling and installing the Ethernet Routing Switch 8600.
Safety precautions navigation
•“Personal safety” (page 27)
•“Module safety” (page 28)
•“Cable and connector safety” (page 28)
•“Electrostatic discharge safety” (page 29)
Personal safety
For your safety, review the following personal safety warnings before working with the Ethernet Routing Switch 8600.
DANGER
Risk of injury by fan blades
When removing the fan module, do not put your hands into the opening because of the spinning fan blades in the adjacent fan modules.
WARNING
Risk of personal injury
Grasp the fan tray at the middle of the front panel, and be careful to keep your fingers out of the fan blades.
DANGER
Risk of injury by electric shock
The electrical connector at the rear of the slot poses a risk of electrical shock.
Nortel Ethernet Routing Switch 8600
Quick Start
30 May 2008
Copyright © 2008 Nortel Networks
