Nortel Networks NN46205-310 Procedure job aid Setup Utility prompt descriptions, Prompt Action

66Configuration

Procedure job aid: Setup Utility prompt descriptions

Prompt	Action
Please provide primary	Press Enter to accept the default (/flash/config.cfg),
config-file path	or enter a different file location for the primary
[/flash/config.cfg]:	configuration file. To store the configuration file
	on the PCMCIA card, use /pcmcia/config.cfg.
	Specifying the path to the file is optional.
Please provide	Press Enter to accept the default (/flash/p80a4
primary image-file path	1xx.img), or enter a different file location for the
[flash/p80a41xx.img]:	primary image file. Specifying the path to the
	file is optional. If the runtime image resides on
	a PCMCIA card, you must specify the path (for
	example /pcmcia/filename).
Please add system	Press Enter to accept the default (Ethernet Routing
prompt [Ethernet Routing	Switch-8606), or enter a different string of up to 20
Switch-8606]:	characters.
Please select CPU	Press Enter to accept the default (5), or specify 6
Master slot (5/6) [5]:	for the master CPU slot.
Master CPU mgmt port:	Press Enter to accept the default(n), or enter
autonegotiation [n] (y/n)?	y to indicate that you want the master CPU
	management port to use autonegotiation.
speed (10/100) [10]:	Press Enter to accept the default (10 Mbps), or
	specify 100 Mbps.
Do you want to enable	Press Enter y if you want the boot and runtime
automatic savetostandby	configuration files to be saved on the backup
mode [n] (y/n)?	CPU.Press Enter to accept the default (n), if you
	want the boot and runtime configuration files to be
	saved only on the primary CPU.
Do you want to enable	Press Enter y if you want the chassis to run in 128
m-mode support [n] (y/n)?	K or M mode. Press Enter to accept the default
	(n), if you want it to run in 32 K mode only.
	To run in 128 K mode, the CPU module must be
	an 8691 or higher and the switch must have at
	least one 8600 module (128 K module).
	If you enable m-mode support and you have a
	mixed configuration of modules, the E-modules
	and classic modules are disabled.
Do you want to enable	Enter y if you want to enable enhanced operation
enhanced operation mode	mode. Accept the default (n), if you do not want to
support [n] (y/n)?	enable enhanced operation mode. If you enable
	enhanced operation mode and you have a mixed
	configuration of modules, the classic modules (E-
	or M-modules) are disabled.

Nortel Ethernet Routing Switch 8600

Quick Start

NN46205-310 02.01 Standard

30 May 2008

Copyright © 2008 Nortel Networks