Nortel Networks NN46205-310 Connecting the modem using the CLI, Changing passwords using the CLI

Models: NN46205-310

1 82
Download 82 pages 40.24 Kb
Page 22
Image 22

22New in this release

Connecting the modem using the CLI

This section describes how to connect a modem to the modem port on an SF/CPU module using the CLI command. You can access the CLI through a modem connection to the Ethernet Routing Switch 8690SF, 8691SF/CPU, or 8692SF/CPU modules.

For more information, see “Connecting a modem using the CLI” (page 53).

Connecting the modem using the NNCLI

This section describes how to connect a modem to the modem port on an SF/CPU module using the NNCLI command. You can access the NNCLI through a modem connection to the Ethernet Routing Switch 8690SF, 8691SF/CPU, or 8692SF/CPU modules.

For more information, see “Connecting a modem using the NNCLI” (page 56).

Setting the system date and time using the CLI

This section describes the instructions to set the system date and time using the CLI.

For more information, see “Setting system date and time using the CLI” (page 59).

Setting the system date and time using the NNCLI

This section describes the instructions to set the system date and time using the NNCLI.

For more information, see “Setting system date and time using the NNCLI” (page 59).

Changing passwords using the CLI

This section describes the instructions to set new passwords for each access level, or change the logon password for the different switch access using the CLI.

For more information, see “Connecting a modem using the CLI” (page 53)

Changing passwords using the NNCLI

This section describes the instructions to set new passwords for each access level, or change the logon password for the different switch access using the NNCLI.

For more information, see “Changing passwords using the NNCLI” (page 63).

Nortel Ethernet Routing Switch 8600

Quick Start

NN46205-310 02.01 Standard

30 May 2008

Copyright © 2008 Nortel Networks

Page 22
Image 22
Nortel Networks NN46205-310 quick start Connecting the modem using the CLI, Connecting the modem using the Nncli