Nortel Networks NN46205-310 quick start Configuration, Connecting a modem using the CLI

.

53

Configuration

This chapter contains configuration instructions for Ethernet Routing

Switch 8600.

Navigation

•“Connecting a modem using the CLI” (page 53)

•“Connecting a modem using the NNCLI” (page 56)

•“Connecting a VT-100 terminal or PC for local access” (page 58)

•“Setting system date and time using the CLI” (page 59)

•“Setting system date and time using the NNCLI” (page 59)

•“Changing passwords using the CLI” (page 22)

•“Changing passwords using the NNCLI” (page 22)

•“Configuring the system using the setup utility” (page 65)

Connecting a modem using the CLI

This section describes how to connect a modem to the modem port on a module. You can access the CLI through a modem connection to the Ethernet Routing Switch 8690SF, 8691SF/CPU, or 8692SF/CPU modules.

The modem port is a DTE device is operating at:

•9600 baud rate

•8 data bits

•no parity

•one stop bit

ATTENTION

Nortel recommends to use the default settings for the Modem port for most modem installations.

Nortel Ethernet Routing Switch 8600

Quick Start

NN46205-310 02.01 Standard

30 May 2008

Copyright © 2008 Nortel Networks