CompoBus/D System Startup | Chapter 4 | |
|
|
|
4-1-4 Free Allocations
HAllocation Areas and Maximum Words for Different PCs
When free allocations are used, the remote I/O areas consist of input blocks 1 and 2, which input Slave data to the PC, and output blocks 1 and 2, which output data from the PC to the Slaves. These four blocks can be allocated as desired using the following words. Each block, however, must consist of con- tinuous words within one data area.
PC |
| SYSMAC Programmable Controllers |
| ||
|
|
|
|
|
|
| C200HX/HG/HE PCs | C200HS PCs | |||
|
|
|
|
| (all models) |
| CV500/ | All other | All other | ||
|
| ||||
|
| models |
| models |
|
|
|
|
|
|
|
Words that | CIO 0000 to | CIO 0000 to | IR 000 to IR 235, IR 300 to IR 511 | IR 000 to IR 235, | |
can be | CIO 2427 | CIO 2555 |
|
| IR 300 to IR 511 |
allocated |
|
|
|
|
|
G008 to G255 |
| HR 00 to HR 99 |
| HR 00 to HR 99 | |
|
|
| LR 00 to LR 63 |
| LR 00 to LR 63 |
| D00000 to D08191 | D00000 to | DM 0000 to DM 4095 | DM 0000 to | DM 0000 to |
|
| D24575 |
| DM 5999 | DM 5999 |
Max. No. of | Each block can be up to | Each block can be up to 100 words | The total number | ||
words | 100 words (including unused | (including unused areas). | of words in all | ||
| areas). |
| The total number of words in all four | four blocks must | |
|
|
| be 80 words or | ||
|
|
| blocks must be 300 words or less | ||
|
|
| less (including | ||
|
|
| (including unused areas). | ||
|
|
| unused areas). | ||
|
|
| If message communications are | ||
|
|
|
| ||
|
|
| used, the total number of words in |
| |
|
|
| all four blocks must be 100 words or |
| |
|
|
| less. |
|
|
Note | 1. | The Data Memory (DM) Area cannot manipulated by bit, so it is not suitable as the remote I/O |
|
| allocation area for the Inverter. |
Note | 2. | If a CPU Bus Link is used with a |
|
| ing it impossible to use this area for CompoBus/D communications. |
Output area |
Output block 1 |
Output block 2 |
Start word
No. of words allocated (“oc- cupied”)
Start word
No. of words allocated (“oc- cupied”)
Input area |
|
Input block | 1 |
Input block 2 |
Start word
No. of words allocated (“oc- cupied”)
Start word
No. of words allocated (“oc- cupied”)
Note Using a Configurator, set the areas for each block, the start word, and the allocated words for each block.