CompoBus/D System Startup | Chapter 4 | |
|
|
|
4-3 Startup Procedure
The CompoBus/D communications system can be started from any of the nodes on the Network. The following procedure gives the startup process after turning ON the power to the Inverter’s CompoBus/D Communications Card. If the startup process shown below is interrupted or stops before being com- pleted, an error will occur. Correct errors that occur, referring to Chapter 6 Communications Errors.
1.Turn ON the power.
2.The PWR indicator will turn ON: Power is being supplied.
3.The MS indicator will be lit red and then green: Confirming MS indicator status.
4.The NS indicator will be lit red and then green: Confirming MS indicator status.
5.The MS indicator will flash: Shows Optional Card startup processing status.
6.The MS indicator will be lit: The Optional Card is ready.
7.The NS indicator will flash: The Optional Card is connected to the Network and startup processing is being performed.
8.The NS indicator will be lit: The Network is started.