When Using Audio Devices
1 Connect the audio device to the AUDIO IN jack with the XLR cable.
2 Set the AUDIO IN switch to [REAR] for the channel to which the XLR cable is connected.
3 Set the LINE/MIC/+48V selector switch on the rear panel to [LINE].
LINE/MIC/+48V
Selector Switch
Preparation
AUDIO IN Jack
AUDIO IN
Switch
Mounting the Camera on a Tripod
When mounting the camera on a tripod, use the tripod adapter supplied with the camera.
1 Mount the tripod adapter on the tripod.
Tripod Adapter
Pan head
Removing the Camera from the Tripod Adapter
Tripod Adapter
Red Lever | Black Lever |
While holding the red lever down, move the black lever in the direction of the arrow, and slide the camera backward to remove it.
Note
Select an appropriate hole in the adapter, taking into account the center of gravity of the camera and tripod adapter combined.
Also, make sure that the diameter of the selected hole matches the diameter of the pan head screw.
2 Mount the camera on the tripod adapter.
Slide the camera forward along the grooves until you hear a “click”.
Note
If the tripod adapter pin does not return to its original position after the camera has been removed, hold the red lever down and move the black lever in the direction of the arrow again, in order to return the pin to its original position.
Please note that the camera cannot be mounted if the pin remains in the center.
Preparation：Mounting the Camera on a Tripod 105