Panasonic AJ-HPX2000 manual 183

	Items/				Adjustable	Remarks
Data Saved					Range
VITC UB					USER/EXT	Select the user bits mode for VAUX TC
MODE					TIME	(VITC).
					DATE	USER/EXT:
					TCG	If UB MODE is set to EXT, the EXT
					FRM RATE	value is recorded. If not, USER value
					REGEN	set by UB is recorded.
						TIME: Select local time (hours,
						minutes, seconds).
						DATE: Select local date and time (2 last
						digits of year, month, date, time).
						TCG: TCG value enters UB.
						FRM RATE:
						Select camera shoting information
						(frame rate, etc.). For more
						information, see [Frame rate
						information recorded in user bits]
						(page 58).
						REGEN: Read out value stored in card
						and record value continuously.
						‹Note
						When the unit operates in 24P, 24PA,
						720P, and Native mode, the FRM RATE is
						fixed.
–	C	U	F	–
TCG SET					ON	ON/OFF switching for the feature that
HOLD					OFF	always starts recording (when the power
						is turned ON again) the TCG value that
						was set before the power is turned OFF.
–	C	U	F	–
FIRST REC					PRESET	For the first recording after the power is
TC					REGEN	turned on, a P2 card is inserted and
						then switching from this P2 card to
						another recording-target P2 card is
						performed, select whether or not to
						regenerate the time code as the value
						on the new P2 card.
						PRESET:
						Use the camera-recorder’s internal
						time code.
						REGEN:
						For clips recorded on the recording-
						target P2 card, regenerate the time
						code as the time code of the clip that
						has the most recent date and time.
						‹Notes
						z Set the date and time accurately. For
						guidance on setting, see [Setting the
						Internal Clock’s Date and Time] (page
						60).
						z During operation in either 24P or
						24PA mode, regeneration of the value
						of the card recorded in drop-frame is
–	C	U	F	–		not permitted.
P.OFF LCD					ON	Select whether or not to display the time
DISPLAY					OFF	code setting and counter indication on
						the LCD monitor when the power is
						turned OFF.
						ON: Display setting and indication while
						the power is turned OFF.
						OFF: Power-down LCD monitor while
						camera power is turned OFF.
–	C	U	F	–
						Setting and indication disabled.
TC	OUT				TCG	Select the time code to be output to the
					TCG/TCR	time code output connector.
						TCG:Always output time code generator
						value.
						TCG/TCR:
						Display time code generator value
						in recording mode, and time code
						reader value in playback mode.
–	C	U	F	–

	Items/					Adjustable	Remarks
Data Saved						Range
TC DISP SEL						30F	Select the display format for the time
						24F	code frame digits. (For 1080-59.94i,
							720-59.94P or 480-59.94i only）
							For details, refer to [Recording time code
							and user bits] (page 56).
							30F: Display time code frame digits in 30
							frames.
							24F: Convert time code frame digits into
							24 frames for display.
–	C		U	F	–
TC	VIDEO					0	For setting to correct the time code
SYNCRO						1	according to the delay of video signals.
						2	0: Do not correct.
						3	1: To delay the time code to be input
							according to the timing of the video
							images.
							2: To forward the time code to be output
							according to the timing of the video
							images.
							3: To delay the time code to be input and	Menu
							forward the time code to be output,
							respectively, according to the timing of
							the video images.
							For details, refer to [Externally Locking
							the Time Code] (page 62).
–	C		U	F	–
REC REVIEW						ON	For selecting whether the time code is
REGEN						OFF	regenerated to the value on the P2 card
							or not, when subsequent recording
							starts after setting the RET SW item on
							the SW MODE screen to R.REVIEW
							and pressing the RET button on the lens
							or the USER button on the unit on which
							the RET SW function is assigned.
							ON: The time code is regenerated to
							the value on the tape.
							OFF: The time code is not regenerated.
–	C		U	F	–
		UMID SET/INFO
	Items/					Adjustable	Remarks
Data Saved						Range
COUNTRY						NO-INFO	Input the user’s country. NO-INFO is
							displayed until the input completes.
–	C		U	F	–
	ORGANIZATION					NO-INFO	Input the user’s organisation or
							company name. NO-INFO is displayed
							until the input completes.
–	C		U	F	–
USER						NO-INFO	Input the user name. NO-INFO is
							displayed until the input completes.
–	C		U	F	–
DEVICE							Indicate the product ID number.
NODE
–	–		–	–	–

‹Note

Please refer to [Setting UMID Information] (page 67) for the UMID information setting.

The ____ in the Adjustable Range column indicates the preset mode.

Menu : Menu Description Tables 183