Panasonic AJ-HPX2000 Error Codes, 1394 Error Codes

Error Codes

The following error codes are displayed in the display window if an error occurs in the camera:

Confirm the type of warning and refer to the details in the [Warning Description Tables] (page 145) for countermeasures.

Code No.		Description		Type of warnings
	E-11	Video initialisation error	1.	System Errors
	E-27	Recording control error	1.	System Errors
	E-30	P2 card removal error	2.	Card removal error
	E-34	LCD microcontroller error	1.	System Errors
	E-38	P2 streaming microcontroller error	1.	System Errors
	E-39	Abnormal initialization of the AVC-Intra codec board (optional AJ-YBX200G)	1. System Errors
	E-3F	Microprocessor error in the camera control circuit.	1. System Errors
	E-40	Image sequence error (in case of 24P, 30P and 25P)	6.	Image Sequence Error (24P, 30P, 25P)
	E-63	Something is wrong with the system control microprocessor.	1. System Errors
	E-6F	Reference signal error.	1. System Errors
00:00:00:11		Recording error on a P2 card	7.	Recording Error
	1394 Error Codes

Code No.	Description	Recording	Indication in display
			window
	Signals being input to the DVCPRO/DV	Stops
1394 E-80	connector are not 1a speed transfer
	signals in DV format.
	Signals being input to the DVCPRO/DV	Stops
1394 E-81	connector are not 1a speed transfer
	signals in DVCPRO (25 Mbps) format.
	Signals being input to the DVCPRO/DV	Stops
1394 E-82	connector are not 1a speed transfer
	signals in DVCPRO50 (50 Mbps) format.
1394 E-83	Incorrect signals are being input to the	Stops
	DVCPRO/DV connector.
	Signals being input to the DVCPRO/DV	Stops
1394 E-84	connector are not in DVCPRO or DV
	format.		The time code section of the
	Signals being input to the DVCPRO/DV	Stops
			display window indicates the
1394 E-85	connector are not 1x speed transfer signals
			appropriate error code that
	in DVCPRO HD format.
			blinks every two seconds.
1394 E-87	Incorrect audio signals are being input to	Continues with no sound.
	the DVCPRO/DV connector.
	No signal is supplied to the DVCPRO/DV	While the recording mode continues, no
	connector.	data is recorded on cards unless the
1394 E-90		abnormal condition is corrected. If an
		error has occurred before recording, then,
		recording does not start.
	With the menu option REC MODE set to	Stops
1394 E-91	DV, copy guard information signals for
	recording prohibited data are being input to
	the DVCPRO/DV connector.
	The DVCPRO/DV connector is not properly	No recording in 1394 input mode can be
1394 E-92	connected. The viewfinder indicates the	performed.
	message "1394 INITIAL ERROR."

148 Maintenance and Inspections : Warning System