To read data on an SD memory card
1 Navigate the menu to the <SD CARD READ/WRITE> screen.
To select a file number
2 Turn the JOG dial button to move the cursor to the menu option [R. SELECT]. Then, press the dial button.
< SD CARD READ/WRITE >
# R.SELECT | 1 |
READ |
|
W.SELECT | 1 |
WRITE |
|
CARD CONFIG
TITLE READ
TITLE:
1:******** 5: ********
2:******** 6: ********
3:******** 7: ********
4:******** 8: ********
3 Turn the JOG dial button to select a desired number (1 - 8). Then, press the dial button.
To read data on a selected file
4 Turn the JOG dial button to move the cursor to the option [READ].
< SD CARD READ/WRITE >
R.SELECT:1
#READ
W.SELECT:1
WRITE
CARD CONFIG
TITLE READ
TITLE:
1:******** 5: ********
2:******** 6: ********
3:******** 7: ********
4:******** 8: ********
5 Press the JOG dial button to display the following message:
READ?
YES
#
NO
6 Turn the JOG dial button to move the cursor to YES. Then, press the dial button.
When the data has been read, the following message appears:
READ OK
The data will not be read if any of the following messages appears when the JOG dial button is pressed:
Error message | Remedy |
|
|
READ NG | Insert an SD memory card. |
NO CARD |
|
(No SD memory card inserted.) |
|
|
|
READ NG | The card has not been |
FORMAT ERROR | formatted using the unit. |
(SD memory card not properly | Replace the card. |
formatted.) |
|
|
|
READ NG | Write file data. |
NO FILE |
|
(No file found.) |
|
|
|
READ NG | Only data written with the unit |
ERROR | is readable. |
(SD memory card not |
|
readable.) |
|
|
|
READ NG | Example: The SD memory card |
CANNOT ACCCESS | is not accessible because it is |
(SD memory card not | being played back. |
accessible.) | After the operation in process, |
| read data. |
|
|
7 To exit the menu, press the MENU button. The settings menu will be replaced by status indications for the unit.
Recording for Settings and Adjustments
Adjustments and Settings for Recording : Handling data 87