Preparing for Audio Input

Take the following steps to prepare the camera for connecting audio input devices.

When Using the Front Microphone

AJ-HPX2000 can be equipped with the AJ-MC900G stereo

microphone kit (an extra-cost option).3 Connect the microphone cable to the MIC IN jack on the camera.

1 Open the microphone holder.

2 Mount the microphone and tighten the clamping screw. The microphone must be attached with the UP mark on the microphone facing up.

Clamping Screw

MIC IN Jack

4 Set the AUDIO IN switch to [FRONT] depending on the audio channel to be recorded.

AUDIO IN

Switch

When Using a Wireless Receiver

When Using the Unislot Wireless Receiver

1 Remove the cover to insert the wireless receiver and secure it with the screws.

2 Set the AUDIO IN switch to [W.L.] depending on the audio channel to be recorded.

104 Preparation：Preparing for Audio Input