Contents of P2 Card Status Display Settings

From the thumbnail menu, select PROPERTY > CARD STATUS. The following screen appears.

When “REMAIN” is selected:

When “USED” is selected:

1

2

 

 

1

2

 

 

5

 

 

 

 

 

 

3

5

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 4

1. Write-protect Mark

1. Write-protect Mark

The

 

mark appears if the P2 card is write-protected.

The

 

mark appears if the P2 card is write-protected.

 

 

 

 

 

 

 

 

Manipulating

2.P2 Card Status (remaining free space)

The remaining memory capacity of the P2 card is indicated by a bar graph and percentage. The bar graph indicator moves to the left as the remaining free space decreases.

The following indications may appear, depending on the card status:

FORMAT ERROR:

An unformatted P2 card is inserted.

NOT SUPPORTED:

An unsupported card is inserted in the camera.

NO CARD:

P2 cards are not inserted.

Use the cursor button to place the cursor on the P2 card for data you want to access and press the SET button to display detailed information about the P2 card to check individual information such as the serial number and the user ID.

3.P2 Card Remaining Capacity/Total Capacity

Displays the P2 card remaining capacity and total capacity in minutes. The total of the remaining memory capacity for each P2 card that is displayed may not match the actual total remaining memory capacity for the P2 cards because only the figure in minute is displayed.

4.Total remaining free space for the slot

Displays the total remaining free space for all 5 slots. Please note that the remaining capacity of a write- protected P2 card is not included in the total remaining capacity.

5.Warning symbol

When the following P2 card is detected, the symbol is displayed.

RUN DOWN CARD:

The number of rewrites of the card exceeds the limit defined in the standards.

DIR ENTRY NG CARD:

The directory structure on the P2 card does not comply with the standards.

The warning can be confirmed on the P2 card detailed information indication in [2.P2 Card Status (remaining free space)].

2.P2 Card Status (used memory capacity)

The used memory capacity of the P2 card is indicated by a bar graph and a percentage figure. The bar graph indicator moves to the right as the used memory capacity increases.

The following indications may appear, depending on the card status:

FORMAT ERROR:

An unformatted P2 card is inserted.

NOT SUPPORTED:

An unsupported card is inserted in the camera.

NO CARD:

P2 cards are not inserted.

Use the cursor button to place the cursor on the P2 card for data you want to access and press the SET button to display detailed information about the P2 card to check individual information such as the serial number and the user ID.

3.P2 Card memory capacity/Total Capacity

Displays the used memory capacity on a P2 card and the total capacity, in minutes. Because fractions are truncated, the figure shown for used memory capacity on a P2 card may differ from the figure for total capacity.

The used memory capacity of a write-protected P2 card is displayed as 100%.

4.Total used memory capacity for all slots

Displays the total used memory capacity for all 5 slots.

5.Warning symbol

When the following P2 card is detected, the symbol is displayed.

RUN DOWN CARD:

The number of rewrites on the card exceeds the limit defined in the standards.

DIR ENTRY NG CARD:

The directory structure of the P2 card does not comply with the standards.

The warning can be confirmed on the P2 card detailed information indication in [2.P2 Card Status (remaining free space)].

Thumbnails with Clips

Manipulating Clips with Thumbnails : Properties 127