10

9

8

 

 

34

24

 

 

 

 

25

 

 

20

21

22

23

 

 

36

 

 

26

 

 

35

 

 

1

 

15

 

 

27

 

 

 

 

 

2

28

29

3

11 17

33

4

14

6

13

16

19

32

18

31

30

12 5 7

their and Parts

14.SAVE ON/OFF switch

Used to select the power supply method for each output section.

ON: The output selected through the menu option SAVE SW is power-saved. This option can be found on the OPTION MODE screen on the SYSTEM SETTING page.

OFF: Power saving is canceled.

18.MON OUT (monitor output) connector

Used to output down-converted (analog composite) signals for the monitor. The video signals linked to the setting of the OUTPUT SEL switch are output from here. Through an internal menu option, the characters can be superimposed independently of the VIDEO

OUT connector. For more information, see [Settings of signals output from MON OUT connector] (page 82).

Functions

‹Note

The ON/OFF switch does not function during record- ing. The ON/OFF status changes after recording is completed.

15.VIDEO OUT (output signal selector) switch

Changes the mode of the signals output through the VIDEO OUT connector.

HD SDI : HD SDI signals are output. When the camera-recorder is in SD mode, SD SDI signals are output.

SD SDI : SD SDI signals are output. (Signals are down-converted in HD mode.)

VBS： Composite video signals are output. (Signals are down-converted in HD mode.)

16.VIDEO OUT CHARACTER switch

This switch controls the superimposition of characters onto the video output from the VIDEO OUT connector.

ON: Characters are superimposed.

OFF: Characters are not superimposed.

For types of characters, see [Settings of signals output from VIDEO OUT connector] (page 81).

17.VIDEO OUT (video signal output) connector

This connector outputs video signals. The video signals linked to the settings of 15. VIDEO OUT switch, 16. VIDEO OUT CHARACTOR switch and 19.OUTPUT SEL switch are output from here.

19.OUTPUT SEL (output signal selection) switch

Used to switch the signals output from the VIDEO OUT and MON OUT connectors.

MEM: Video from the camera is output during recording or when recording is paused or playback signals are output from the P2 card during playback.

CAM: Video from the camera is output constantly.

OFF: Video is not output, and the camera-recorder operates in power-saving mode.

Note that the audio output is synchronised with the video.

For types of video outputs, see [Settings of signals output from VIDEO OUT connector] (page 81) or [Settings of signals output from MON OUT connector] (page 82).

‹Notes

zDuring recording, this switch does not switch output signals before stopping the recording operation.

zWhen CAM is not selected through the REC SIGNAL menu option, the output signals are the same as for MEM even if the switch is set to CAM. The menu option REC SIGNAL is found in the SYSTEM MODE screen on the SYSTEM SETTING page.

Parts and their Functions：Shooting and Recording/Playback Functions Section 19