6 Turn the JOG dial button until a desired character appears.
The characters that appear are switched in the following order:
Space:
Ð
Alphabetical characters: A to Z
Ð |
|
Numerals: | 0 to 9 |
Ð |
|
Symbols: | ', >, <, /, - |
7 Press the JOG dial button to accept a desired character.
8 Turn the JOG dial button to move the cursor to the next digit (clockwise), and repeat Steps 6 - 7 to set characters (up to eight characters).
To write data on a selected file
9 When the title is set, turn the JOG dial button to move the cursor to [:].
< SD CARD READ/WRITE >
R.SELECT:1
READ
W.SELECT:1
WRITE
CARD CONFIG
TITLE READ
;
TITLE:
1:******** 5: ********
2:******** 6: ********
3:******** 7: ********
4:******** 8: ********
The data will not be written if any of the following messages appears when the JOG dial button is pressed:
Error message | Remedy |
|
|
|
|
WRITE NG | Insert an SD memory card. |
NO CARD |
|
(No SD memory card inserted.) |
|
|
|
WRITE NG | The card has not been |
FORMAT ERROR | formatted using the unit. |
(SD memory card not properly | Replace the card. |
formatted.) |
|
|
|
WRITE NG | The card may be defective. |
ERROR | Replace the card. |
(SD memory card not writable.) |
|
|
|
WRITE NG | Remove the card and disable |
WRITE PROTECT | the protect. |
(SD memory card write- |
|
protected.) |
|
|
|
WRITE NG | Example: The SD memory card |
CANNOT ACCCESS | is not accessible because it is |
(SD memory card not | being played back. |
accessible.) | After the operation in process, |
| format the card. |
|
|
WRITENG | The card is not writable |
CARD FULL | because it has no free space. |
(SD memory card has no free | Delete unwanted files or |
space.) | replace the card with a new |
| one. |
|
|
13 Turn the JOG dial button to move the cursor to YES. Then, press the dial button.
When the data has been written, the following message appears:
10
11
12 Press the JOG dial button to display the following message:
WRITE OK
14 To exit the menu, press the MENU button.
The settings menu disappears and the status of the unit is indicated at the top and bottom of the viewfinder screen.
WRITE?
YES
#
NO TITLE:
Notes
zThe SD CARD R/W SELECT screen can be used to select the type of the menu to be written on the SD memory card.
zIt is possible to overwrite the setup file on the unit with a setup file from another device. Note that if the file is overwritten, the original setup file from the other device will be lost.
zWe recommend managing the respective SD memory cards on the respective devices independently.
86 Adjustments and Settings for Recording : Handling data