Warning System
Warning Description Tables
If a problem is detected immediately after the power is turned on, or during operation, this will be indicated by the WARNING lamp, lamps inside the viewfinder and a warning tone.
Note
The WARNING lamp has the highest priority, followed by the tally lamp, and then the warning tone. When multiple errors occur simultaneously a higher priority indication will be triggered. The [WIRELESS RF], however, may not be indicated, depending on the menu setting.
1. System Errors
Display window | The error code lights up. | |
indication | ||
| ||
|
| |
WARNING lamp | Blinks 4 times per second. | |
|
| |
Tally lamp | Blinks 4 times per second. | |
|
| |
Viewfinder | The SYSTEM ERROR indication and the | |
error code light up. | ||
| ||
|
| |
Warning tone | Beeps continuously. | |
|
| |
Warning | An error in the reference signal or the | |
description | communication. | |
|
| |
Recording/ |
| |
playback | The operation stops. | |
operation |
| |
|
| |
Countermeasures | Please confirm [Error Codes] (page 148) | |
| and consult your distributor. |
2.Card removal error
Display window | Error code | |
indication | ||
| ||
|
| |
WARNING lamp | Blinks 4 times per second. | |
|
| |
Tally lamp | Blinks 4 times per second. | |
|
| |
Viewfinder | The “TURN POWER OFF” indicator lights | |
up. | ||
| ||
|
| |
Warning tone | Continues to beep. | |
|
| |
Warning | The P2 card being accessed has been | |
removed, resulting in an error in the internal | ||
description | ||
memory of the | ||
| ||
|
| |
Recording/ |
| |
playback | Cannot be performed. | |
operation |
| |
|
| |
| Turn off the power to the | |
Countermeasures | there is an error in a clip on the removed P2 | |
| card, repair the clip. | |
|
|
3. Battery Empty
Display window | All 7 bar indicators for battery remaining |
indication | capacity start blinking. |
WARNING lamp | Lights up. | Maintenance | |
| |||
|
|
| |
Tally lamp | Blinks once per second. |
| |
|
|
| |
Viewfinder | The BATT LED lights up. |
| |
|
|
| |
Warning tone | Beeps continuously. |
| |
|
| and | |
Warning | The battery has run out. | ||
description | |||
| Inspections | ||
|
| ||
Recording/ |
| ||
|
| ||
playback | The operation stops. |
| |
operation |
|
| |
|
|
| |
Countermeasures | Replace the battery. |
| |
|
|
| |
4. |
|
| |
|
|
| |
Display window | All 7 bar indicators for remaining MEDIA |
| |
indication | capacity start blinking. |
| |
|
|
| |
WARNING lamp | This lamp will illuminate continuously until an |
| |
operation is made after recording. |
| ||
|
| ||
|
|
| |
Tally lamp | This lamp will flash 4 times every second |
| |
until an operation is made after recording. |
| ||
|
| ||
|
|
| |
Viewfinder | The WP indicator lights up. |
| |
|
|
| |
Warning tone | This tone will sound continuously until an |
| |
operation is made after recording. |
| ||
|
| ||
|
|
| |
Warning | The inserted P2 cards are |
| |
description |
| ||
|
| ||
|
|
| |
Recording/ |
|
| |
playback | Recording is disabled. |
| |
operation |
|
| |
|
|
| |
Countermeasures | Disable the |
| |
| card. |
|
Maintenance and Inspections : Warning System 145