Selecting the USER CLIP NAME recording method

Select META DATA > USER CLIP NAME from the thumbnail menu to select the recording method. Two options are available: TYPE1 and TYPE2.

zTYPE1 (Factory setting）

USER CLIP NAME to be

recorded

If clip metadata has been read in Uploaded data

If no clip metadata has been read

Same as GLOBAL CLIP ID

in or if the setting for recording (UMID data) clip metadata has been turned off

‹Note

When a P2 card with a memory capacity of 8 GB or more is used in camera-recorder and a one-time continuous recording exceeds the prescribed duration (DVCPRO HD and the AVC-Intra 100 (optional): about 5 minutes; DVCPRO50 and the AVC-Intra 50 (optional): about 10 minutes; DVCPRO or for DV: about 20 minutes) or when a one-time recording extends over more than one P2 card, the recording concerned will automatically be undertaken as a separate clip. At this time, each clip will be provided with its own COUNT value.

Example of recording (DVCPRO HD) a clip on one P2 card:

zTYPE2

If clip metadata has been read in

If no clip metadata has been read

USER CLIP NAME to be

recorded

Uploaded data + COUNT value*

REC start (recording start)

 

REC/PAUSE (recording pause)

 

Recording duration = Approx. 7 min.

 

 

 

 

 

 

 

 

 

Clip 1

Clip 2

 

 

 

COUNT value

COUNT value

 

 

= 0001

= 0002

 

 

 

 

 

 

 

 

 

 

5 min.

 

2 min.

Manipulating

in or if the setting for recording Same as CLIP NAME clip metadata has been turned off

*The COUNT value is indicated as a four-digit number. The COUNT value is incremented each time a new clip is captured if clip metadata has been read in and TYPE2 has been selected as the recording method.

The COUNT value can be reset using the following

procedure.

Select PROPERTY > DEVICE > META DATA from the thumbnail menu, then select USER CLIP NAME to display the menu shown below. Select “COUNT RESET” with the cursor and press the SET button to reset the COUNT value to 1.

Example of recording a clip on two P2 cards:

REC start (recording start)

 

REC/PAUSE (recording pause)

 

 

 

 

 

 

 

 

 

 

Clip 1

 

Clip 2

 

 

 

COUNT value

 

COUNT value

 

 

= 0003

 

= 0004

 

 

 

 

 

 

 

 

 

 

 

1st card

 

2nd card

 

If the clip thumbnails are displayed as shown in the example above or their properties are indicated using a P2 device, the thumbnail and COUNT value of clip 1 will be displayed.

Clear the uploaded metadata

Select META DATA > INITIALIZE from the thumbnail menu, and press the SET button. Select “YES” when the confirmation screen is displayed.

‹Notes

zJapanese or Chinese characters indicated in English or other characters that cannot be indicated in English will not display properly; they will be indicated as ¢.

zThe letters which can be input with AJ-HPX2000 are only the alphanumeric. AJ-HPX2000 cannot input Japanese and Chinese.

Thumbnails with Clips

Manipulating Clips with Thumbnails : Setting of Clip Meta Data 121