During INTERVAL REC mode general notes

zSound

By selecting ON/OFF for the menu option AUDIO REC in the REC FUNCTION screen, it is possible to specify whether or not sound will be recorded during interval recording.

zRecord/Playback Buttons

During interval recording, all operation buttons other than STOP (REW, FF, PLAY/PAUSE) are disabled. However, during a pause in ONE SHOT mode, REC REVIEW can be executed with the RET button on the lens.

zIf the power is turned off during recording

If the AJ-HPX2000 is turned off during interval recording, the video stored in memory is recorded onto the P2 card, and then the camera automatically turns off.

zTo start emergency recording during a pause

By setting the REC button to USER MAIN or USER1/ USER2, emergency recording can be performed during a pause by pressing the button. Pause time measurement continues after such emergency recording.

◆Note

However, this function does not work when the recording

signals are in 24P, 24PA or 24PN (Native) mode.

zTime code indication

When recording starts, the time code (TCG) display may not update until the unit recognizes the P2 card.

zRemoving cards

During INTERVAL REC mode operation, the P2 card access LED for the inserted P2 card blinks in orange. Do not remove the P2 card during this status. If you should remove the card accidentally, restore clips. However, even if the clips are restored, the last 3 to 4 seconds up to a maximum of about 10 seconds of the recording may be lost if the P2 card is removed while recording onto multiple P2 cards. For more information on how to fix clips, see [Restoring Clips] (page 117).

zOperation mode

INTERVAL REC does not work when “1394” is selected for the menu option REC SIGNAL. The menu option REC SIGNAL is found in the SYSTEM MODE screen on the SYSTEM SETTING page. For more information, see [Recording Setting and Operation Mode] (page 41).

zThumbnail operation and menu operation

Thumbnail operation does not work during the INTERVAL REC mode operation. Press the STOP button before operating thumbnails.

When standby time is set to 1 minute or more or when in ONE SHOT mode, the following restrictions apply even though the menu can be operated during stand-by mode.

ŠThe respective settings or SYSTEM MODE, REC SIGNAL, CAMERA MODE, REC MODE, 25M REC CH SEL, and PC MODE cannot be changed.

ŠThe respective settings for SD CARD READ/WRITE, LENS FILE CARD R/W, READ USER DATA, and READ FACTORY DATA cannot be executed.

38 Recording and Playback：Interval Recording