Recording Review Function

When recording is paused, pressing the RET button automatically locates the last two seconds of video just recorded, and the viewfinder provides video playback.

After playback, the camera-recorder is again ready to start recording.

The picture location/playback duration can be increased to up to 10 seconds by continuously pressing the RET button. For short clips, however, when the start of a clip is located, continuously pressing the RET button does not play back any clips before that clip.

The function of the RET button may be assigned to a desired user button by using one of the menu options USER MAIN SW, USER1 SW or USER2 SW. These options can be found in the <USER SW> screen on the CAM OPERATION page.

When recording is paused, pressing the PLAY/PAUSE button plays back the last recorded clip, from the beginning. After completion of playback, the camera- recorder enters the stopped state.

Recording starts

Recording pauses

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2-10 Seconds

 

 

 

 

 

 

 

 

 

 

 

Recorded clip

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The PLAY button plays back

The RET button

 

 

the clip from the beginning.

puts the camera-

 

 

 

recorder into REC

 

 

 

REVIEW mode.

‹Notes

zSet the menu option RET SW (found on the SW MODE page for CAM OPERATION) to R. REVIEW.

zWhen the OUTPUT SEL switch on the side panel is positioned at [MEM], the video for REC REVIEW is output from the video output connectors (VIDEO OUT and MON OUT connectors), and also to the viewfinder.

Note that when a backup device is connected to back up the video the pictures for REC REVIEW are backed up.

Playback and Recording

Recording and Playback：Recording Review Function 39