Press the Shot Mark button.

Shot Mark

A shot mark can be added to a clip thumbnail to distinguish this clip from the others.

1 Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2 Use the cursor buttons to move the pointer over the clip to which you want to attach a shot mark.

3

4 A shot mark will be attached to the clip thumbnail

 

under the pointer.

 

To delete a shot mark, reposition the pointer over the

Shot Mark Button

clip and press the Shot Mark button.

‹Notes

zA shot mark can be attached during recording. Please refer to [Shot Mark Function] (page 41) for more information.

zWhen adding a shot mark to (or deleting the shot mark from) a clip recorded across multiple P2 cards, do this with all these P2 cards inserted into P2 card slots.

Text Memo

During recording or playback, you can add text memos to clips. Text memos can be used to play back clips at some point or break clips into chunks and copy the necessary portions.

Adding a text memo

Text memos can be added in one of the following ways.

zPress the TEXT MEMO button during recording or playback of a clip. A text memo is added to the position where the button is pressed.

zPress the TEXT MEMO button when the thumbnail screen is displayed. A text memo is added to the beginning of the clip.

‹Note

One clip can have up to 100 text and voice memos in combination. Note that camera-recorder is not capable of adding or showing voice memos.

Thumbnails with Clips Manipulating

Text Memo Button

Manipulating Clips with Thumbnails : Shot Mark 115