Press the THUMBNAIL MENU button, and select OPERATION > REPAIR CLIP from the thumbnail menu.
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.

Using a text memo to break a clip and copy the necessary portion

1

Select a desired text memo in a clip by carrying out

4 User the cursor buttons and SET buttons to select the

 

steps 1-3for [Playing back a clip at the position where

destination slot. Then, select YES to start copying the

 

a text memo is recorded] (page 116).

clip. The portion between the selected text memo and

2

 

the next one is copied. If no text memo is found after

Move the pointer to the desired text memo, and then

the selected one, then all part after the selected text

 

press the SET button. You can select more than one

memo is copied. If multiple text memos are selected,

 

text memo.

the selected sections are copied.

3

Press the THUMBNAIL MENU button to select

5 When the clip is being copied, the camera-recorder

 

OPERATION > COPY.

indicates the progress of the copy process and

 

 

cancellation status. To discontinue the copy process,

 

 

press the SET button. Then, a YES/NO confirmation

 

 

screen is displayed. Use the cursor buttons and SET

 

 

button to select YES.

Deleting Clips

Clips Manipulating

1

2 Use the cursor buttons to move the pointer over the clip you want to delete.

Press the SET button to select the clip.

3 Press the THUMBNAIL MENU button and select OPERATION > DELETE from the thumbnail menu.

4 The following screen appears. Use the cursor buttons and the SET button to select YES.

Thumbnails with

5 The clip is deleted. All selected clips (in blue-green frames) are deleted by this operation.

‹Note

Pressing the SET button stops the deletion operation in the middle.

Restoring Clips

Restores clips that are defective as a result of sudden powering-down during recording, or removal of the P2 card being accessed.

‹Note

Only those clips with yellow corrupt clip markers can be restored. Delete the clips with red corrupt clip markers. If the clip cannot be deleted, format the P2 card.

During restoration of the clips, however, the defective-clip indicator may change from yellow to red, resulting in inability to restore the clips.

1

2 Use the cursor buttons to move the pointer over the clip you want to restore (defective clips are indicated by corrupt clip marks).

Press the SET button to select the clip.

3

4 The confirmation window appears. Use the cursor buttons and the SET button to select YES.

Manipulating Clips with Thumbnails : Deleting Clips 117