How to Use the User Data
It is possible to transfer settings and other data to the user area of the internal memory of the unit.
This data allows you to quickly reproduce an optimum setup state.
To write data, go to the <INITIALIZE> screen from the FILE page. To read the written user data, go to the <SCENE> screen from the FILE page.
To write settings data in the user area
1
2 Turn the JOG dial button to move the cursor to the option WRITE USER DATA.
< INITIALIZE >
READ FACTORY DATA
#WRITE USER DATA
3 Press the JOG dial button to display the following message:
WRITE?
YES
#
NO
4 Turn the JOG dial button to move the cursor to YES. Then, press the dial button.
This writes the settings data into the user area of the internal memory of the unit.
5 To exit the menu, press the MENU button.
To read written user data
1 Navigate the menu to the <SCENE> screen.
2 Turn the JOG dial button to move the cursor to the option READ USER DATA.
<SCENE >
#READ USER DATA
SCENE SEL | :1 |
READ
WRITE
RESET
TITLE1 : ********
TITLE2 : ********
TITLE3 : ********
TITLE4 : ********
3 Press the JOG dial button to display the following message:
READ?
YES
#
NO
4 Turn the JOG dial button to move the cursor to YES. Then, press the dial button.
The data written in the user area of the internal memory of the unit is read to complete the setting.
5 To exit the menu, press the MENU button.
The set user data may be also read without navigating the menu.
1 Turn off the POWER switch.
2 Position the WHITE BAL switch at [PRST].
WHITE BAL
Switch
3 With the AUTO W/B BAL switch flipped up, turn on the POWER switch.
This resets all settings for USER menu options to their defaults.
88 Adjustments and Settings for Recording : Handling data