To title settings data for scene files

1 Navigate the menu to the <SCENE> screen.

2 Turn the JOG dial button to move the cursor to the option [TITLE 1 - 4] for the appropriate scene file.

< SCENE >

READ USER DATA

SCENE SEL:1

READ

WRITE

RESET

#TITLE1 : ********

TITLE2 : ********

TITLE3 : ********

TITLE4 : ********

3 Press the JOG dial button to move the cursor to the title entry area, putting the unit in entry mode.

< SCENE >

READ USER DATA

SCENE SEL:1

READ

WRITE

RESET

;

TITLE1 : ********

TITLE2 : ********

TITLE3 : ********

TITLE4 : ********

4 Turn the JOG dial button until a desired character appears.

The characters that appear are switched in the following order:

Space:†

Ð

Alphabetical characters: A to Z

Ð

 

Numerals:

0 to 9

Ð

 

Symbols:

', >, <, /, -

5 Press the JOG dial button to accept a desired character.

6 Turn the JOG dial button to move the cursor to the next digit (clockwise), and repeat Steps 4 - 5 to set characters (up to eight characters).

7 When the title is set, turn the JOG dial button to move the cursor to [:].

8 Press the JOG dial button to return the cursor to the options TITLE 1 - 4.

9 Turn the JOG dial button to return the cursor to the option WRITE.

10 Press the JOG dial button to display the following message:

WRITE?

YES

# NO TITLE:

11 Turn the JOG dial button to move the cursor to YES. Then, press the dial button.

This writes the title into the scene file area of the unit internal memory.

12 To exit the menu, press the MENU button.

Recording for Settings and Adjustments

Adjustments and Settings for Recording : Handling data 91