Warning and Status Display Functions

1

2

6

7

3

 

 

4

 

5

8

7.Display window

This window displays warnings, battery-remaining level, sound volume, time data, and other information.

‹Note

When the battery is installed, the camera-recorder indicates the data even if the power is turned off. To turn off the data indications to keep the battery from being discharged, specify OFF for the menu option P. OFF LCD DISPLAY found in the TC/UB screen on the MAIN OPERATION page.

8.Rear tally lamp

When the 2.BACK TALLY switch is set on [ON], the rear tally lamp behaves in the same way as the back tally lamp.

1.Back tally lamp

When the 2.BACK TALLY switch is set to [ON], the lamp behaves in the same way as the front tally lamp at the viewfinder.

2.BACK TALLY switch

This switch controls the action of the 1.back and 8.rear tally lamps.

ON: Back and rear tally lamps enabled.

OFF: Back and rear tally lamps disabled.

3.WARNING lamp

This lamp starts blinking or lights up if something unusual occurs in the memory.

4.USB lamp

Stays on when the camera-recorder is in USB mode.

5.Access lamp

Blinks when the camera-recorder is in recording or playback mode or when a P2 card is being accessed, or stays on when a recordable P2 card is inserted.

6.LIGHT button

Use this button to control illumination of the display window.

Alternately pressing this button toggles illumination of the 7.display window on or off.

24 Parts and their Functions：Warning and Status Display Functions